Convert data transfer speeds between bits per second, Kbps, Mbps, Gbps, bytes per second and megabytes per second.
Google AdSense Banner
This area will contain advertisements after approval.
Result
0.001 Kbps
Google AdSense Banner
This area will contain advertisements after approval.
This tool converts between data transfer rate units using fixed decimal conversion factors, following standard networking convention, for example, 1 megabit per second equals 1,000 kilobits per second, and 1 byte per second equals 8 bits per second. Enter a value in any supported unit and it's converted to all others using these standard ratios.
Internet plans are advertised in bits per second (like '500 Mbps'), but file download progress in a browser or app is typically shown in bytes per second (like 'MB/s'), and there are 8 bits in a byte. A 500 Mbps connection therefore tops out around 62.5 MB/s in a download manager, which can look surprisingly low compared to the advertised number even when everything is working correctly.
Converting a 500 Mbps internet plan to megabytes per second gives exactly 62.5 MB/s (500 ÷ 8), the maximum realistic download speed you'd see reported in a browser or download manager, which uses bytes rather than bits.
Reading 'Mbps' (megabits per second, a connection speed) as if it were 'MB/s' (megabytes per second, a download speed), an 8x mixup that makes an internet plan look either far faster or far slower than reality.
Assuming this converter uses the same 1024-based prefixes as file sizes, network transfer rates conventionally use decimal (1000-based) prefixes, unlike our Data Storage Converter, which uses binary (1024-based) prefixes for file sizes.
Expecting to actually hit the advertised speed in practice, the theoretical maximum from a plan's stated Mbps is rarely achieved consistently due to network overhead, server limits, and Wi-Fi conditions, similar to the caveat on our Bandwidth Calculator.
Divide megabits per second by 8 to get megabytes per second, since there are 8 bits in a byte.
This converter uses decimal (1000-based) prefixes, the standard convention for network transfer rates. Our Data Storage Converter, by contrast, uses binary (1024-based) prefixes, matching how file sizes are typically measured.
Google AdSense Banner
This area will contain advertisements after approval.